Heating cable 230 V — 2 m with thermostat 32 W
Kerbl pipe heating cable with thermostat, 230 V
The Kerbl pipe heating cable with thermostat is designed to protect water pipes and water supply systems from freezing. It is suitable for agricultural buildings, water supply systems and other locations where pipes are exposed to low temperatures in winter.
The product range includes heating cables of various lengths, allowing you to choose the most suitable option for a specific section of pipe.
KEY INFORMATION
| Parameter | Value |
|---|---|
| Application | Protection of pipes and water supply systems from freezing |
| Supply voltage | 230 V |
| Thermostat | Built-in |
| Switch-on temperature | Approx. +3 °C |
| Switch-off temperature | Approx. +13 °C |
| Frost protection | Down to -45 °C |
| Protection rating | IPX7 |
| Power cable length | 2 m |
| Available options | Various heating cable lengths |
| Can the cable be shortened? | No |
APPLICATION
The heating cable is designed for locations where water pipes are exposed to low temperatures and are at risk of freezing. It is suitable for water supply pipes, agricultural buildings and other installations where a specific section of pipe needs to be heated.
The various cable lengths allow you to choose a suitable solution for both shorter and longer sections of pipe. The product is intended to protect water pipes from freezing, not to heat heating-system pipes or for use in locations where the cable is subject to mechanical stress.
HOW IT WORKS
The cable is connected to a 230 V power supply, and its operation is automatically controlled by the built-in thermostat. When the ambient temperature drops to approximately +3 °C, the heating switches on automatically. When the temperature rises to approximately +13 °C, the heating switches off.
This means the cable operates only when needed, helping to maintain water flow during freezing weather and reducing the risk of pipes freezing.
Important: the heating cable must not be shortened.